 |
 |
 |
 |
RADIAL TONEBONE TRIMODE.
The Tonebone Classic Trimode is our most progressive pedal ever!
Trimode gives you instant access to superb clean, rhythm and lead tones
without tap dancing. And tone you will receive. Based on the heritage
of America's finest tube amplifiers, the Trimode delivers five
generations of tone from the slight overdrive of early rock & roll
to blistering power tones of today's high gain amps.
Following the award-winning Tonebone Classic, the Trimode
combines the warmth and even harmonics of a 12AX7 tube with our unique
dual-stage drive for the natural dynamics and response of a vintage
tube amp.
As the name implies, Trimode has three settings: 'True Bypass
Clean Mode' for the natural tone of your guitar - direct to your amp;
'Rhythm Mode' with input drive, output gain and our unique Interstage�
drive to precision-tune the mayhem you are about to unleash; and 'Solo
Mode' with its own input drive, output gain, and mid boost for days of
sustain. Trimode goes even further with a built-in effects loop on the
solo channel that lets you instantly engage a delay or pedal chain with
a single foot action.
Trimode: 3 modes, huge tone and amazing dynamics � finally, a pedal that sounds and feels like a real tube amp!
- True bypass clean mode
- Dynamic rhythm distortion mode
- Sustaining lead distortion mode
- 12AX7 tube for natural overdrive tone
- Effects loop on lead solo channel
The Radial Trimode offers an amazing combination of simplicity and
functionality with innovative, well thought-out features accessible
through intuitive controls and i/o options. The two footswitches
provide for easy toggling between modes and large LED indicators allow
instant at-a-glance monitoring of the Trimode's status.
Separate drive, level and mid-boost control for each
distortion channel gives the user the power to easily set up exactly
the distortion sounds required, then toggle between them with no
tap-dancing!
The overall TOP END and DRIVE GAIN switches together with
variable HIGH and LOW EQ controls and the 'anti-presence' FILTER
control will guide you to the perfect tone for your amp/guitar
combination.
Effects can be connected via the INSERT �" send-receive TRS
jack and are switched in when you press the 'Toggle' switch to select
CH-2.
SPECIFICATIONS AND CONTROLS:
Circuit type: Hybrid tube / proprietary circuit
Tube type: Standard 12AX7 vacuum tube
Input impedance: 1meg Ohm at input jack
Output impendence: 10K Ohm Drive
gain 3-way switch: Used in conjunction with the drive gain control.
Drive switch selects the gain range of the overdrive circuit.
Low: Normal mode (+0dB Nominal)
Med: Medium distortion (+9dB)
High: High distortion (+20dB)
Intermediate drive (Intergain�): Variable fine-tune gain for CHANNEL-1( rhythm) - counter-clockwise for more gain
Drive-1 & 2 controls: Used in conjunction with the drive gain
switch, drive is used to adjust the overall amount of gain to the
overdrive circuit.
Mid Boost 1 & 2 - two 3 pos switches: Used to fatten up the sound
for more cut and sustain during solos. Also, will fatten up the sound
of single coil pickups.
CHANNEL-1 (rhythm)
High: +8dB @ 390Hz
Medium: +4dB @ 390Hz
Bypass: No boost
CHANNEL-2 (lead)
High: +12dB @ 390Hz
Medium: +7dB @ 390Hz
Bypass: No boost
FILTER control: Balances the ratio of high frequencies between
amplifier and Classic distortion to compensate for overly bright
amplifiers.
TOP END 3-way switch:
Switch sets the overall tonal character of the Classic to best match
the amp and settings. Brighter amps are normally compensated with
darker settings.
Bright: Boosts +6dB @ 10kHz
Flat: No boost
Dark: Cuts -6dB @ 1.8kHz
High & Low EQ controls: Unity gain to +15dB
Low: +/- 14.5 db @ 100Hz
High: +/- 10 db @ 4.3kHz
Footswitches: True bypass with green on/off status LEDToggle 1<>2 with red & yellow status LED's
LED indicators: Large 3mm OD ultra-bright LED's
Switching: Opto-coupler assisted, 5msec Rise time
Construction: 14 gauge steel, baked enamel finish
Size: 8.12 x 4.25 x 2.12" (175 x 108 x 54mm)
Weight: 2.55lb (1.16kg)
|
|
 |
 |
 |
 |
|
 |

|