 |
 |
 |
|
RADIAL TONEBONE CLASSIC.
The Tonebone Classic is a 12AX7 tube equipped true-bypass distortion
that has been optimized for flexibility and tonal range. Following the
vision set by Leo Fender in the 1950�s, the Classic is based on vintage
overdrive sounds that started in the '60s and '70s and today remain
some of the most sought after tones. With three drive settings,
variable drive control and powerful EQ, the Classic lets you dial in
the slight overdrive to high-gain saturation and everything in between.
And like a real tube amp, when you turn your guitar volume
down, the Classic cleans up naturally - without the noise, hum or buzz
that is common with most other pedals. At higher settings, every note
remains distinct. The Classic is so responsive and dynamic your playing
style shines through!
The Radial Tonebone Classic � the most dynamic and responsive distortion pedal ever!
- 12AX7 tube for natural overdrive tone
- True bypass clean mode
- Powerful EQ for wide tonal range
- Ultra low-noise - amazing dynamics and feel
- Cleans up like a tube amp when guitar turned down
Build
like a tank� Compact to fit on a pedalboard, the Tonebone Classic is
the world�s most compact tube distortion. It is in fact a hybrid that
combines the control of a dual-stage solid-state front end with the
warmth and natural even harmonic generation of a 12AX7 tube.
The
tube is mounted on its side to keep the pedal profile down for easy
pedal action and is powered by an external 15VDC supply. Power is
internally regulated and filtered to eliminate noise. To further reduce
self-noise a unique ground plane circuit topology is employed making
the Tonebone classic the quietest pedal in its class.
Tonebone
is also built tough; 14-gauge steel construction reduces stress on the
PC board and a baked enamel finish will keep your Tonebone looking
great for years!
SPECIFICATIONS AND CONTROLS:
Circuit type: Hybrid tube / proprietary circuit
Tube type: 12AX7 vacuum tube
Input impedance: 1meg Ohm at input jack
Output impendence: 10K Ohm
Drive
gain 3-way switch: Used in conjunction with the drive gain control.
Drive switch selects the gain range of the overdrive circuit.
Low: Normal mode (+0dB Nominal)
Med: Medium distortion (+9dB)
High: High distortion (+20dB)
Drive
control: Used in conjunction with the drive gain switch, drive is used
to adjust the overall amount of gain to the overdrive circuit.
MID
BOOST 3-way switch: Used to fatten up the sound for more cut and
sustain during solos. Also, will fatten up the sound of single coil
pickups.
High: +12dB @ 620Hz
Medium: +6dB @ 390Hz
Bypass: No boost
FILTER
control: Balances the ratio of high frequencies between amplifier and
Classic distortion to compensate for overly bright amplifiers.
TOP
END 3-way switch: Switch sets the overall tonal character of the
Classic to best match the amp and settings. Brighter amps are normally
compensated with darker settings.
Bright: Boosts +6dB @ 10kHz
Flat: No boost
Dark: Cuts -6dB @ 1.8kHz
HIGH & LOW EQ controls: Unity gain to +15dB
Low: +/- 14.5 db @ 100Hz
High: +/- 10 db @ 4.3kHz
LEVEL
control: Used to balance the output level between the input drive
without altering any of the tonal characteristics. Works like the
master volume on an amplifier.
Footswitch: True bypass with green on/off status LED Heavy-duty high-cycle switch
LED indicator: Large 3mm OD ultra-bright status LED
Switching: Opto-coupler assisted, 5msec Rise time
Construction: 14 gauge steel, baked enamel finish
Size: 7"w x 4 1/4"d x 2"h (174 x 108 x 51mm)
Weight: 2.15lb (1kg)
AUDIO DEMOS:
 MP3 Tonebone Classic Audio Demos
|
|
|
 |
|
 |
|
|
|
