 |
 |
 |
|
VOODOO LAB PEDAL POWER 2 PLUS
The Voodoo Lab Pedal Power 2 is a universal power supply for all
battery-operated guitar pedal effects. New features include two outputs
that will power Line 6 modeling pedals and two outputs that can have a
variable voltage "sag" to emulate dying carbon batteries. Like the
original Pedal Power, each of its eight outputs are completely
isolated, short circuit protected, regulated and highly filtered. The
Pedal Power 2 comes complete with cables, detachable AC power cord, is
hand made in the U.S.A. and carries a 5-year warranty.
�I�ve wrestled with various store-bought and custom-made power
supplies over the years, but this was the first time I was able to
connect everything in minutes and get great results without hum or
profanity� -Guitar Player
Important -The Pedal
Power 2 Plus is manufactured to operate from a specific supply voltage.
There are three different models which accept 100V, 120V or 240V mains.
All units sold in North America are for 120V only. You cannot operate a
120V Pedal Power using 240V power without the correct step down
transformer. The supply voltage is marked on the bottom of the unit.
Isolated Outputs-
Each output is completely isolated. This means that you won't have any
ground loops or interaction between pedals that can cause hum and
noise. It also means that unlike other "common ground" power supplies,
you can run effects that have both negative and positive grounds
without difficulty.
Boss Pedals -
There are two types of Boss pedal effects, which specify either PSA or
ACA type power supplies. Boss pedals specifying the PSA type adapter
operate at 9V like most other pedals. Boss pedals which specify the ACA
type adapter operate at a higher voltage.
The Voodoo Lab Pedal Power is the only universal power supply
available which will power any type of Boss pedal effect. There is a
selector switch for each DC output on the bottom of the Pedal Power to
select the correct voltage.
Short Circuit Protection
-
Each output on the Pedal Power is short-circuit protected. This means
that if you have a short in a power cable, or one of your pedals
malfunctions, the Pedal Power will temporarily turn off the power to
that pedal. All other outputs will continue to function normally and
the Pedal Power is not damaged.
Toroidal Transformer
-
Power transformers create an electric field that can cause hum and
noise in your effects. Some effects, such as wahs, are particularly
susceptible to this. A toroidal transformer has a specially designed
core that greatly reduces this electric field. The Pedal Power uses
this type of power transformer so that your pedal board is quiet.
Pedal Power 2 Plus Specifications
IEC connector:
120V 50/60Hz (North America model)
100V 60Hz (Japan model)
230V 50/60Hz (Europe/Australia model)
Model and input power are marked on the bottom of
unit.
|
5.5x2.1mm barrel connectors -
center negative
Short circuit protected
|
5.5x2.1mm
right angle barrel connectors (6)
5.5x2.1mm
straight barrel connectors (2)
5.5x2.5mm �red� barrel for L6 (1)
3.5mm mini plug for vintage MXR or
Electro-Harmonix (1)
9V battery snap for pedals without a power jack (1)
|
6" wide x
3.4" deep x 1.75" tall (152 x 86 x 45 mm)
Weight: 2 lbs. (0.9 kg)
|
Toroidal
power transformer
Rear Courtesy Auxiliary AC outlet, 200 watts max
|
|
|
 |
|
 |
|
|
|
