 |
 |
 |
|
NADY PMX-600 6 CHANNEL POWERED MIXER.
The Nady PMX-600 Powered Mixer with DSP effects was developed using the
expertise of professional sound engineers and working musicians. It has
superior performance and offers greater flexibility than any other
powered mixer in its price range. Perfect for home studio recording projects.
FEATURES:
- 6 mono input channels
- XLR mic and 1/4" TRS line inputs
- Fan-cooled, bipolar amplifier with 2 x 225W RMS power at 4 ohms
- 4 master faders
- L/R main mix and G1-2 group submix buses
- Group to Main enable switch
- 32-bit DSP reverb (plate, gate, room, hall, stadium)
- 2 x 7-band graphic EQ
- Channel trims and peak LEDs
- Switchable low-cut filters
- Channel hi, low, and sweepable mid controls
- Switchable +48 volt phantom power
- 2 aux sends and 2 aux returns each with level control
- Tape/CD In and record out stereo RCA jacks with tape level control
- 6 balanced 1/4" TRS inserts
- 2 x 10-segment LED display bargraph meters with power amp peak indicator
- Balanced 1/4" TRS and XLR stereo main outs
- Balanced 1/4" group 1 and 2 outputs
- Dual left and right 1/4" amplifier outputs for easy speaker daisy chaining
- Internal shielded AC supply with 115V/230V selector switch
SPECIFICATIONS:
INPUT SECTION
Input Connector Input Impedance Max Level
MONO CH MIC XLR BALANCED 2.8K_ +13dBu, 3.6V RMS
MONO CHANNELLINE 1/4" UNBALANCED 10K_ +17dBu, 5.5V RMS
1/4" TRS BALANCED 20K_ +23dBu, 11V RMS
AUX RETURN 1/4" UNBALANCED 10K_ +11dBu, 2.8V RMS
TAPE IN STEREO RCAJACKS 10K_ +18dBu, 6V RMS
INSERTINPUT 1/4" UNBALANCED 10K_ +22dBu, 10V RMS
With Trim, Tape In, and Aux Return Level controls set to Mid (50%)
With Trim set to Min (0%)
Phantom Power on XLR inputs : 48VDC, globally selected
MIXER SECTION
Trim: Range 28dB
Channel High EQ +/-15dB: 12KHz, Rotary control
Channel Mid EQ +/-15dB: Variable 250Hz - 6KHz, Two Rotary controls
Channel Low EQ +/-15dB: 80Hz, Rotary control
Channel Aux 1, Aux 2 Eff, Pan: Rotary controls
Low Cut, L-R Select, G1-2 Select: Push-button switches
Channel faders: -_to +10dB, 60mm sliders
Echo Effect Time Delay: 0 to 200mS
Dual 7-Band EQ +/-12dB: 63Hz, 250Hz, 630Hz, 1KHz, 2.5KHz, 6.3KHz, 15KHz 20mm sliders
Master and Group dual faders, Effect single fader : -_to +10dB, 60mm slider
MASTER OUTPUT SECTION
Channel Input to Main Output
Frequency Response: 20Hz~25KHz (+/- 3dB)
THD + Noise: 0.04%
S/N Ratio: -85dB (gain controls @ unity), -94dB (gain controls down)
Noise Floor: 350uV (gain controls @ unity), 150uV (gain controls down)
Output Connector Output Impedance Max Level
AUX SEND 1 & 2 1/4" UNBALANCED 200_ +21dBu, 9V RMS
GROUP1 & 2 1/4" UNBALANCED 200_ +18dBu, 6V RMS
CONTROLROOM L-R 1/4" UNBALANCED 200_ +8dBu, 1.9V RMS
RECORD OUT STEREO RCAJACKS 1.4K_ +21dBu, 8.5V RMS
MAIN L-R 1/4" UNBALANCED 200_ +21dBu, 8.5V RMS
XLR BALANCED 400_ +27dBu, 17V RMS
HEADPHONE 1/4" STEREO 12_ 2 x 50mW, 1.75V RMS
POWER OUTPUT SECTION
8_Both Channels Driven (1% THD): 150W RMS per side
4_Both Channels Driven (1% THD) : 200W RMS per side
Channel Input to Speaker Output
Frequency Response: 25Hz~22KHz (+/- 3dB)
THD: 0.09%
S/N Ratio: -72dB (gain controls @ unity), -85dB (gain controls down)
Noise Floor : 9mV (gain controls @ unity), 2mV (gain controls down)
Amplifier Protection: Fan cooling, short circuit protection, current limiting, Speaker DC protection circuits, clip indicators
Power ON/OFF relays for anti-thump circuit
GENERAL
Power Requirements: Voltage selectable, 115VAC/60Hz or 230VAC /50Hz
Fuse Requirements: 5x20mm glass tube F.B. 8A250V @ 115VAC
Weight : 24.5 lbs. (11.1 Kg)
Dimensions (HWD): 6.4" x 16.9" x 17.2" (163 x 430 x 437mm)
|
|
|
|
|
|
|
|
|
