 |
 |
 |
|
MAXON CP-101 OPTICAL COMRESSOR.
The CP101 Compressor provides clean, smooth compression with ultra-low
noise and incredible transparency. The CP101's 4:1 compression ratio is
so subtle that it's easy to forget the unit is on � until you turn it
off, that is. While it is on you will notice note-to-note levels that
are smoother and more consistent, chords and arpeggios that are tighter
and more focused, and when used with an overdriven amp, sustain that
will last for days. Best of all, you'll notice minimal coloration to
your guitar signal and less of the note-attack alterations so common to
other compressors.
At the heart of the CP101's circuit sits an
HTV #P873 CdS (Cadmium Sulfur) Photocoupler. This light-sensitive
component varies resistance based on the input signal to control the
amp gain, increasing gain as the input signal weakens. Most other
current-production compressors accomplish this task using a VCA
(voltage controlled amplifier), but the multiple transistors packed
into a VCA inevitably lead to high noise levels, which means lots of
"hiss" from your rig. The CP101's optical circuit keeps the noise-floor
low - so low that you can run the unit after a distortion and still
retain near-silent operation.
With its ultra low-noise level,
transparent operation and natural playing response the Maxon CP101 is
the perfect compressor for players who hate using compressors.
Input Impedance: 500K Ohms
Input Jack: 1/4 inch standard phone jack
Output Impedance: 10K Ohms
Output Jack: 1/4 inch standard phone jack
Output: 1
Controls: Sustain, Level
Switch: Normal/Effect
Max Input Level: 2 dBu
Max Output Level: 0 dBu Noise (IHF-A) -110 dBu
Max Compression: 42 dB
Power Supply: 9V Manganese dry cell battery (S-006P) or special AC adaptor
Power Voltage: DC9 V (Battery) / DC10 V (AC-adaptor)
Current Consumption: 11 mA (9V) / 12 mA (10 V) AC Adaptor AC210N (option)
Input: AC120V Output DC9V/200 mA Center - / Sleeve +)
Dimensions: (whole) 70 mm (W) x 112 mm (D) x 55 mm (H)
AUDIO DEMOS:
|
|
|
 |
|
 |
|
|
|
