DURHAM ELECTRONICS ZIA DRIVE.
What is a Zia Drive? A very tight low compression overdrive pedal designed to be that perfect rhythm guitar box. If you hate the feeling of sag in your fingers this is the box for you. It takes your 6L6 or 6V6 amp and gives it the chime of an EL84. If you have an EL84 amp it will boost that bottom end and make it sing at lower levels.
Early 70's Stones fans will love the ZIA!
FEATURES:
- Totally hand built/wired
- Teflon wire throughout
- NOT TRUE BYPASS - Durham Electronics tried true bypass and didn't like it. Everyone on Durham Electronics' client list is using non true bypass models. Non true bypass is their preference.
- Does the Zia DRIVE color your sound while by-passed? "Very transparent, hi-fi sounding, didn't color my sound at all." -Eric Johnson
- Switch Craft jacks
- Alpha full size potentiometers
- Bright Blue LED
- Uses standard negative tip 9V DC supply (not included)
- 2 year warranty from the manufacturer
USER MANUAL:
Thank you for purchasing a Zia Drive Pedal. The
Zia Drive was designed with the rhythm guitar player in mind. The voicing of the Zia Drive is very tight with
minimal compression put into your signal chain. Complex chord voicings will cut right through with your
Zia Drive.
The Controls of the Zia Drive are very
straight-forward.
Level
Control � The Level Control is a master
volume output for the pedal. This control limits the signal coming out of the Zia Drive pedal.
Gain
Control � The Gain Control will control the
amplification level of your pedal. This control will allow you more or less of an overdriven sound from your pedal.
Turned all the way clock-wise will get you the greatest amount of gain from the pedal. Set the Gain at 9:00 and
you will have a clean boost.
Tone
Control � The Tone Control will allow you to
color your sound brighter or darker. With your tone control in the 12:00 position the tone is at unity. Turning the
knob clock-wise will add brightness to your sound, counter-clock-wise will add darkness to your
sound.
Input /
Output � The Input jack is located on the
right side of the pedal when looking at your pedal�s face-plate. When you plug a cable into the input jack, the 9
Volt battery inside will be activated. If you are not using an external power supply, when the pedal is not in use it
is best to unplug cable from the input jack in order to save battery life. The Output jack is located on the left
side of the pedal.
Power
Supply � The Zia Drive uses a standard style
9 Volt negative tip DC power supply. Use of incorrect power supply will cause permanent damage to the pedal and
void the warranty. When a power supply is used, the battery is bypassed.
Warranty �
This pedal is guaranteed to the original
purchaser, to function properly for the period of 2 years. Any negligent use of this product will void all
warranties. AUDIO DEMOS:
 Zia Drive MP3 Audio Demo 01 - Deluxe Amp
Zia Drive MP3 Audio Demo 02 - Vox Amp
|
