 |
 |
 |
|
DLS EFFECTS ROTOSPIN ROTARY SPEAKER SIMULATOR
The NEW RotoSPIN� by DLS Effects, creates ultra-real Rotary Speaker sounds with dynamic speaker swirl, grind, and DopplerTM Effect.
This effect is exactly what Leslie and Vibratone enthusiasts� desire! You�ll have your audience asking �Wow, where�s your Rotary Speaker cabinet?� Dial in multiple cabinet sounds & Mic distances using the Tweeter Intensity and, Bass Rotor Level. Rotation speeds are set via the Fast, Slow, and Ramp controls. A switchable Overdrive stage can also add grit and edge like the old rotary tube amps. Use OUTA (thicker), or OUTB (brighter), or both for a wide (((DLS Stereo)))� image like no other! The DLS design team enhanced the sound, reduced cost, size, and weight, all while maintaining user controls and rugged road worthiness!
Features:
Fast/Slow Switch: Switch changes to Fast or Slow speed
Ramp Time: Controls how long it takes to ramp up or down to between the Fast or Slow speed.
Fast Speed: Controls the Fast speed (~12:00 O�clock position is actual Rotating speaker fast speed)
Slow Speed: Controls the Slow speed (~12:00 O�clock position is actual Rotating speaker slow speed)
Tweeter Intensity: Depth & style of the tweeter rotary speaker, plus how much swirl, width, and Doppler effect is added.
Bass Rotor Level: Adjusts amount of Bass rotor throb and blend to emulate various cabinets and Mic distances. CCW and CW: deep cabinet styles, 12 o�clock middle of the road cabinet size.
Tweeter Spin LED: Blinks at the tweeter horn spin rate
Bass Spin LED: Blinks at the bass rotor spin rate
Overdrive On � Off switch: Selects between no overdrive (clean), or overdrive clipping like the old drive tube amps
Overdrive Gain: Controls how much overdrive is added (when Overdrive is On)
On/Off Switch: Engages the effect when On (green LED will light), True bypass when Off.
Internal Pot adjustments: INA gain pot, OUTA & OUTB volume
Input/Outs: �� jacks, Mono: INA to either OUTA or OUTB (bright), Stereo: INA to both OUTA and OUTB
Power �+9vdc�: Input for 9 to 12vdc, 90ma minimum, 2.1mm jack, polarity does not matter. (DC adapter included)
Power: Accepts 9vdc to 12vdc input @ 90ma. Standard 2.1mm jack., any polarity! (USA style wall transformer included)
Size: Extremely compact and measures only 3.7�W x 4.7�L x 1.7�H
Case material: Quality die cast aluminum finished with power coat painting for durable finish.
Video Demos:
|
|
|
 |
|
 |
|
|
|
