 |
 |
 |
|
T-REX SPINDOCTOR.
Tone-lovers around the world, say hello to SpinDoctor, the revolutionary new overdrive preamp from T-Rex Engineering. With 4 programmable channels, a full set of tone controls, motorized knobs and gorgeous tube-driven tone, SpinDoctor is a wonder of sonic craftsmanship and engineering.
Stunning Features, Brilliant Design
SpinDoctor delivers all the beautiful, saturated sound you’ve come to expect from T-Rex. But it’s also a triumph of design – packing a stunning array of features into a set of controls so intuitive and easy to use, you’ll have to try to believe it. Here’s what you get:
4 channels of T-Rex tone. For each channel, you set the gain, tone and output exactly how you want it. Switching between channels and making adjustments on the fly is simple, fast and intuitive.
Tone controls let you tune your tone (bass, mid, treble and presence) for each individual channel. When you switch channels, all your settings change too – giving you the perfect depth, sustain and edge no matter how much gain you apply.
Motorized knobs move when you switch channels – like faders on a state-of-the-art studio mixing board. They’re way cool, but they also provide mission-critical visual cues that let you monitor your settings at a glance – and adjust them in milliseconds.
Tube drive gives you the entire spectrum of analogue gain in a single knob. Turn it down low for a clean tube sound with just a bit of edge. Turn it up to lay on the gain. And if you want even more – hit the boost button and blast off into the stratosphere of world-class overdrive.
An Intelligent Distortion Pedal
Plug SpinDoctor into your stage amp, and you’ve got nothing less than the best distortion pedal on the planet. You’ll enhance your amp with 4 custom channels of analogue overdrive – each with its own settings for gain, bass, mid, treble, presence and output. And you can bypass your SpinDoctor from any channel for a clean sound straight from your amp.
A Complete Preamp for Your Guitar
You can also use SpinDoctor as a complete guitar preamp, plugging it directly into a power amp via the output jack. In the studio, use the speaker-simulation output to plug into a studio mixer or AD converter connected to your computer. Special level and frequency knobs let you set the volume and define the character of your “cabinet”. And finally, SpinDoctor’s intuitive MIDI implementation lets you create and store additional channels via an external MIDI device.
CONTROLS:
1. Use the channel switches (A, B, C and D) to select a channel.
2. Set the controls for the channel you’ve selected.
3. Hit STORE to save your settings.
CHANNEL switches: Select the channel (A, B, C, D) you want to play.
TUBE DRIVE knob: Turn it down for a clean tube sound
– crank it up for more overdrive.
TONE CONTROL knob and BASS, MID, TREB, PRES
OUT LEVEL knob: Control the channel’s overall volume.
BOOST button: Hit this for even more overdrive gain.
STORE button: Press to store your channel’s settings.
SETUP OPTIONS:
MIDI SETUP:
Your SpinDoctor features a logical, easy-to-use MIDI implementation that lets
you extend the number of SpinDoctor channels from 4 to as many as 127.
These channels can be created, stored and selected remotely via an external
MIDI controller.
SpinDoctor is programmed to communicate via MIDI channel 1. On your MIDI
board, use MIDI programs 5–127 to create and store your additional SpinDoctor
channels. When you switch to one of these channels via your MIDI board, all 4
SpinDoctor channel indicator lights will light up.
You can also use MIDI to control SpinDoctor channels from your computerbased
recording software. For example, you can store the SpinDoctor channel
you used when recording a
song, and call it up automatically
each time you
open the song for further
recording or editing.
TECHNICAL SPECS:
INPUT: 1/4” standard jack
OUTPUT: 1/4” standard jack
SIM. OUT: 1/4” standard jack
MIDI input
Input impedance: >1 MOhm
Output impedance: <10 kOhm
Power supply: 100–240 V AC, 50–60 Hz
Power consumption: max. 30 watts
Size: 255 x 186 x 65 mm
(in box: 370 x 230 x 110 mm)
Shipping weight: 3 kg
Powered by 2 High-Grade T-Rex 12AX7 Triode Tubes
Take It For a Spin
We’re
convinced that SpinDoctor is simply the best product we’ve ever built.
Take it for a spin – and you’ll understand why it’s the one pedal you
can’t live without.
GUARANTEE:
T-Rex Engineering offers a two-year guarantee on all our products. We will then repair or replace your product and send it back to you – free of charge and usually within a week. |
|
|
|
|
|
|
|
|
