PEDAL JEANIE JR RECHARGEABLE PEDALBOARD 9000mA DC
The Pedal Jeanie JR has the identical features and specifications as the GRID 1, however instead of a 23" x 19" x 4" pedalboard; the JR has a smaller more rectangular size of 23" x 11" x 4.
Say good-bye to AC hum, wasting money on AC to DC power supplies, and tripping on AC extension cords on stage! Introducing the new Pedal Jeanie pedalboards, offering a monsterous 9000mA of DC power for your pedals. That is over 6X the power than the expensive "power bricks". Never again will you have to worry about not having enough power to power your board.
The Pedal Jeanie™ pedalboard is the first rechargeable pedalboard with built in DC connections. There are 8 regulated 9v connections and 2 regulated 12v connections. If you have 18v or 24v pedals just add the optional DC conversion cable. The Pedal Jeanie™ JR pedalboard measures 23” x 111 x 4”, and is constructed of heavy duty 16 gauge steel. Its unique “patent-pending” matrix design offers a myriad of layout options.
The Pedal Jeanie™ JR is not susceptible to AC line noise and thus it offers ultra quiet operation. The Pedal Jeanie™ JR also comes equipped with a battery level LED located on top of the chassis. The LED glows green to show full battery status, then glows orange to show low battery, and finally will glow red to alert the users to charge the pedalboard. With over 50 hours of operation players should only have to charge the Pedal Jeanie™ JR once a week. It can be charged while it is in use, and offers universal power so the Pedal Jeanie™ can be charged anywhere in the world!
All the DC power connections can be run through the holes on top of the
chassis to the built-in DC connections underneath. Each DC connection
accepts a standard 5.5mm x 2.1mm barrel cable. Every connection is
independently circuit protected and has a fault indicator LED to make it
easy to find a shorted pedal or hook-up problem. The wedge shaped
design has an open bottom to keep the weight to a minimum and offers
many set-up possibilities under the chassis.
All DC power cables, tie wraps, batteries and smart charger are included in the box!
- 10 built-in DC barrel connections
- 8 individual 9v connections (750mA ea.)
- 2 dedicated 12v connection (1500mA ea.)
- DC Cables, battery charger and tie wraps included
- 16 gauge steel chassis
- Master stomp switch for easy on/off operation
- LED fault indicator light for each pedal connection
- Battery level LED (Green, Orange, Red)
- Dual rechargeable batteries (4.5 Amp Hr.)
- Universal smart charger
- Stainless steel carrying handle
- Ultra quiet operation
- Powers 10 standard 9v pedals for up to 50 hrs
- Charge while you play capability
Additional Options Purchased Separately:
- Soft Padded Carrying Case
- Hard Shell Padded Carrying Case
- Car Charger
Grid Style Board:
DC Power Connections: