Join our mailing list!








  Home > Fryette Amplifiers >

FRYETTE Valvulator I V1 Line Driver Buffer and Power Supply
Fryette Valvulator I Line Driver and Power Supply
 
Alternative Views:



List Price: $299.00
Our Price: $239.00
You save $60.00!

Stock Status:(Out of Stock)

Product Code: FRYT-V1

Description
 
FRYETTE VALVULATOR I V1 LINE DRIVER BUFFER AND POWER SUPPLY

A powerful vacuum tube buffer/line driver and regulated DC power supply in one unit.

The VALVULATOR I is a must-have accessory that combines two useful and powerful features, a Vacuum Tube Buffer/Line Driver, and a Multiple Output Regulated DC Power Supply, in a single, convenient, AC-powered unit. The VALVULATOR I is a ruggedly built, compact pedal board and professional/home studio tool that operates on standard AC wall current, NO WALL WARTS, and is housed in a rugged steel chassis topped with a sleek stainless steel vented cover.

Degradation of tonal quality is caused by three things:
1. Loss of high frequency response due to cable capacitance.
2. Loss of signal level and high frequency response due to impedance effects.
3. Signal degradation caused by the design of the circuitry in the effects device.

The VALVULATOR I solves all three of these problems using a vacuum tube based Buffer circuit to change your guitar signal from high impedance to low impedance. You will be amazed at the renewed responsiveness of your instrument as well as the effect on your playing. In addition, the VALVULATOR I input stage utilizes the same circuitry as that found in the input stage of most guitar amplifiers. This means you get the same dynamic feel from your instrument as you would if you were plugged directly into your amp!

The VALVULATOR I provides four regulated and isolated outputs which will supply you with all of the clean regulated power you need to insure maximum signal output and frequency response from you pedal devices. And because the power supply outputs are individually isolated, you never have to worry about ground loop hum.

FEATURES:
- A Vacuum Tube Buffer/Line Driver and a Multiple Output Regulated DC Power Supply in one unit
- Eliminates degradation of tonal quality
- Changes your guitar signal from high impedance to low impedance
- Operates on standard AC wall current (no wall wart needed)
- Rugged steel chassis with a sleek stainless steel vented cover

SPECIFICATIONS:
Input Impedance: 1 megohm
Output Impedance: 600 ohm
Gain: Unity Gain at -20dB Nominal
Tube Complement: 1 12AX7WB Sovtek (Russia Selected)


POWER SUPPLY SPECIFICATIONS:
- 3 X 9VDC @ 80mA per output
- 1 X 12VDC @ 150mA

DIMENSIONS:
Actual Size (W x H x D): 6.75" x 3.5" x 3" (17 x 9 x 7.6 mm)
Package Size (W x H x D): 9" x 6" x 4" (32 x 15 x 10 mm)
Actual Weight: 3 Lb. (1.4 kg)
Package Weight: 4 Lb. (1.8 kg)

LEFT PANEL JACKS:
- Input Jack
- Output A Jack
- Output B Jack
- Ground Lift Switch

RIGHT PANEL JACKS:
- 12VDC Output
- 3 x 9.5VDC Output Jack
- AC Input Jack


Browse for more products in the same category as this item:

Fryette Amplifiers
GUITAR PEDALS > Clean Boost
GUITAR PEDALS > Power Supplies
AMPLIFIERS > Guitar Amplifiers by Manufacturer > Fryette Amplifiers
AMPLIFIERS > View All Guitar Amplifiers
POWER SUPPLIES > Power Supplies
POWER SUPPLIES > View All Power Supplies and Adapters
POWER SUPPLIES > Power Supplies > Pedalboard Power Supplies
AMPLIFIERS > Guitar Amplifiers by Manufacturer
AMPLIFIERS
GUITAR PEDALS
POWER SUPPLIES